Blade mCP X Version 2 RTF RC Helicopter - BLH3600UK2

Blade mCPX Version 2 RC Helicopter (Ready to Fly)

The Blade mCPX helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.

It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESC, and gyro. Comes with 2.4GHz DSM2 transmitter and two 1S 200mAh 30C batteries, single port charger with AC adapter and a 1S High Current Ultra-Micro Battery Adapter Lead.

Using an integrated AS3X™ Digital Flybarless System, the heli gets up in the air without a mechanical flybar. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilises the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mCP X V2 a sense of stability and responsiveness no other collective-pitch heli its size can match.

The Ready to Fly helicopter comes with the DX4e. The helicopters' software has been designed to be used with the DX4e, DX5e, DX6i, DX7, DX7s and DX8 transmitters, while allowing commonly used collective pitch functionality such as throttle hold or stunt mode.

Version 2 Changes

• Digital 3-Axis AS3X Sensor
• Large Diameter Tail Rotor
• Swashplate Ball Link Dampers
• 1S 200mAh 30C Battery

Features

• AS3X™ Digital Flybarless System
• Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use
• Capable of manoeuvres such as inverted hover, loops, flips, rolls, funnels, and hurricanes
• Very low disc loading results in high manoeuvrability and good collective response
• Two sets of blades included, fast-flight and high-performance
• Robust, long-lasting dual-ball bearing supported linear cyclic servos
• Two high-performance flight batteries included

Specification:
Main - Rotor Diameter 245mm (9.65")
Length - 235mm (9.25")
Height - 93mm (3.65")
Tail Rotor - 38.1mm (1.5")
Weight - 45.5 g (1.6 oz)
Batteries - 1S 3.7V 200mAh 30C LiPo
Charger - E-flite™ Celectra™ DC LiPo balancing charger and AC power supply
Radio - Spektrum™ DX4e 2.4GHz DSM™ transmitter

In the Box
Blade mCP X Version 2 RTF RC heli
Spektrum DX4e 2.4GHz DSM2/DSMX transmitter
2 x 1S 3.7v 200mAh 30C Li-Po batteries
Set of fast flight main rotor blades
E-flite™ Celectra™ DC LiPo balancing charger and AC power supply
1S High-current micro battery adaptor lead
4 AA batteries for the transmitter
Spare tail rotor blade

Required to Complete
Nothing at all, Everything is in the box

Write Review

Enter the code in the box below: