Blade mCX2 Coaxial Micro RC Helicopter (Bind N Fly) - EFLH2480

Blade mCX2 Coaxial RC Micro Helicopter (Bind N Fly)

The mCX V2 has the same coaxial, counter-rotating rotor head design as the original mCX, but now sports an all new fully enclosed canopy design as well as more favourable flight characteristics. These flight characteristics include a new precision swashplate with user selectable control settings for both beginner and slightly more advanced pilots.

The mCX2 heli is set as default for a level of control, speed and agility suitable for a complete novice, but the control settings can be set to enable the heli to perform at higher speeds and with more agility as ability levels and confidence grow in the pilot.

The canopy design incorporates blue status LED light and for those wanting to take maximum advantage of this feature and fly in the dark a full range of glow in the dark replacement components are available too.

With a factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro, and fully-proportional servos come pre-installed.  This Bind-N-Fly® version without transmitter is perfect for those who already own a DSM2 aircraft transmitter. The Blade mCX2’s ultra-micro size and weight make it possible to fly this heli anywhere indoors.

Features

• 100% factory assembled, test flown and ready to fly right from the box
• Precision swashplate with user-selectable control settings
• Factory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos
• Sleek new body and flashing LED lights
• Coaxial, counter-rotating rotor head design
• 120mAh 14C single-cell 3.7V lithium polymer battery pack
• Powerful dual micro coreless motors
• Full line of replacement parts available
• Bind-N-Fly™ compatible with all aircraft transmitters and modules equipped with Spektrum™ DSM2™ technology

Specifications:
Type - Ultra-Micro Co-axial Helicopter
Main rotor diameter - 190mm (7.5")
Length - 200mm (7.9")
Height - 120mm (4.7")
Weight with battery - 28 g (1.0oz)
Motors - Dual coreless motors
Battery - 1S 3.7V 120mAh 14C LiPo
Charger - 1S 3.7V DC Li-Po
Status light - Blue LED
On-Board electronics - 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully-proportional servos.

In the Box
Blade mCX2 Coaxial Micro RC Helicopter (Bind N Fly)
E-flite 1S 3.7V 120mAh 14C LiPo battery
E-flite 1S 3.7V DC Li-Po charger runs off 4AA batteries
4AA batteries

Required to Complete
4+ Channel DSM2 Aircraft transmitter required

Write Review

Enter the code in the box below: