Blade Nano CP X RC Helicopter (Bind N Fly) - BLH3380

Blade Nano CP X RC Helicopter (Bind N Fly)

Flip, funnel or roll in any room in the house with the incredible Blade Nano CP X. At just 29 grams (barely over an ounce), it's the lightest flybarless CP heli in its class. At the centre of its amazing abilities is the proven AS3X™ (Artificial Stabilisation-3-Axis) Flybarless System. This system uses a 3-axis MEMS sensor and exclusive flight control software to give the Nano CP X a perfect balance of agility and stability. It's unbelievably durable too.

Aggressive flight and pushing the envelope can be done without fear of costly repairs to the heli - or furniture. The Nano is competently capable of inverted flight and intermediate aerobatics, and will give developing pilots confidence to try new manoeuvres as well as fly in smaller areas due to its extreme durability and non-intimidating head speed.

Agility, precision and control is all razor sharp thanks to ballraced linear cyclic servos and the fact that it is the lightest heli in its class also contributes to its high manoeuvrability and good collective response.

Features

• AS3X Flybarless system
• Symmetrical 85mm rotor blades
• 2.1g linear long-throw cyclic servos
• Strong, lightweight airframe
• Carbon fibre main shaft and tail boom
• Sleek body with sharp Nano CP X graphics
• 2 E-Flite® 1S 3.7V 15o mAh 25C LiPo batteries
• DC LiPo charger works with 4AA batteries
• Bind and Fly - Just add a Spektrum transmitter and you're away!

Specification:
Main Rotor Head Type - Collective Pitch (CCPM) Flybarless
Swashplate Type - 140 CCPM
Main and Tail Motor - Brushed
On Board Electronics - Flybarless 3 in 1 control unit, RX/ESC/Gyro
Battery - 150 mAh 1S 3.7v 25C LiPo
Charger - 1-Cell 3.7V 0.3A DC LiPo charger
Length - 197 mm (7.75")
Height - 79mm (3.10")
Flying weight - 29g (1oz)
Main Rotor Diameter - 197 mm (7.75")
Tail Rotor Diameter - 40mm (1.6")

In the Box
Blade Nano CP X Helicopter (Bind N Fly)
DC LiPo charger works with 4AA batteries
2 x E-Flite® 1S 3.7V 15o mAh 25C LiPo batteries
Spare set of main blades
Spare tail blade
4AA batteries

Required to Complete
Spektrum DX4e, DX5e, or any programmable DSM2® or DSMX® transmitter.

Write Review

Enter the code in the box below: