ParkZone P-47D Thunderbolt BNF Airplane - PKZ5380

Overview
ParkZone has brought The Jug to life with this great flying scale recreation that comes out of the box with details like a simulated radial engine, moulded panel lines and a realistic 404th Fighter Group paint scheme. It’s even set up to let you easily add the option of functional flaps and retractable landing gear. And you can bet it flies every bit as good as it looks.

The 15-size brushless motor and E-flite 30A Pro brushless ESC that are installed for you will provide more than enough power for high-speed strafing runs and sport aerobatics.
Best of all, you can have this Bind-N-Fly version flying in the time it takes you to charge the battery and bind its Spektrum AR600 receiver to your full-range DSM2/DSMX aircraft transmitter. A minimum of 6 channels will be required if you want to add the optional flaps and retractable landing gear.
 
Features

• Full 4-channel control - throttle, aileron, elevator and rudder
• E-flite Electric Retracts ready (retracts sold separately - EFLG100)
• Optional flap control (requires two servos - sold separately)
• Spektrum™ 2.4GHz DSMX™ AR600 full range 6-channel receiver (Installed)
• E-flite® 30A Pro brushless ESC (Installed)
• Powerful 15-size brushless outrunner motor (Installed)
• 3S 11.1V 2200mAh 25C Li-Po battery and balancing charger (Included)
• Removable fixed landing gear and steerable tail wheel (Included)
• Clear protective belly skid for gear-off landings (Included)
• Durable and lightweight Z-Foam™ construction
• Requires a full range DSM2/DSMX aircraft transmitter (sold separately)

Specification:
Wingspan - 42.2 in (1070mm)
Overall Length - 36.9 in (940mm)
Flying Weight - 40.0 oz (1130g)
Motor Size - 15-size 950Kv BL Outrunner
CG (centre of gravity) - 60.0mm from leading edge at wing root
Prop Size - 9.5 x 7.5
Speed Control - E-flite 30A Pro Brushless
Battery - 3S 11.1V 2200mAh 25C Li-Po
Control Throw (Ailerons) - Low: 7mm up/down, High: 11mm up/down
Control Throw (Elevator) - Low: 8mm up/down, High: 12mm up/down
Control Throw (Rudder) - Low: 15mm left/right, High: 20mm left/right
Control Throw (Flaps) - Half Flap: 15mm down, Full: 25mm down
Minimum Age Recommendation - 14 years
Experience Level - Intermediate
Recommended Environment - Outdoor
Is Assembly Required - Yes

Required to Complete
4+ Channel DSM2/DSMX compatible Transmitter. 6+ Channels are required for flap and retract functionality.

Optional Items
For Retracts, you will need 10-15 size electric retracts (EFLG100)
For simple installation, also use the pre-bent struts (PKZ5317)
For Flaps, you will need two (2) SV80 servos (PKZ1081)

Write Review

Enter the code in the box below: