E-flite Ultra-Micro UMX Yak 54 3D Electric RC Airplane (Bind-N-Fly Basic) - EFLU3550

E-flite Ultra-Micro UMX Yak 54 3D Electric RC Airplane (Bind-N-Fly Basic) - EFLU3550

E-flite Ultra-Micro UMX Yak 54 3D Electric RC Airplane (Bind-N-Fly Basic)

The E-flite Ultra-Micro UMX Yak 54 Bind-N-Fly is small enough and light enough to be flown just about anywhere with a flying weight of barely over an ounce (36 grams). But what really sets it apart is its specially tuned AS3X stabilization system. This exclusive technology makes it easy for sport pilots to discover the fun of hovering and harriers without sacrificing any of the agility an expert 3D pilot demands.

No assembly is required. The model comes with the motor, Receiver/ESC and servos already installed. All you have to do is charge a battery, bind it to a compatible DSMX transmitter and fly. An E-flite® 150mAh 1S 3.7V 45C LiPo battery is recommended for best performance.*

Feather-Light, Carbon-Reinforced Airframe
Carbon fibre rods brace the wings so you can enjoy outstanding power-to-weight performance and still have the rigidity necessary for crisp control response. The model also features carbon fibre landing gear with wheel pants.

Built-In Side Force Generators
Side Force Generators attached to the wing tips boost rudder authority in knife-edge flight so you can fly tighter knife-edge loops.

Specially Tuned AS3X® Receiver Makes 3D Easy
The AS3X (Artificial Stabilization – 3-aXis) technology in the model’s receiver makes it easy to discover the fun of 3D aerobatics without feeling frustrated. Using a unique combination of sensors and software, it works behind the scenes to make slow-speed and knife-edge manoeuvres feel incredibly stable without limiting the aircraft’s agility or interfering with your control. The plane simply stays in whatever attitude you want without making you struggle to keep it there. The receiver also features five pre-programmed flight modes – three default modes that are active out of the box and two alternate modes you can activate later. Each has different AS3X stability settings tailored for your skill level or the 3D manoeuvres you want to try.

Default Modes
General Flight Mode: Heading hold in roll-axis for a locked-in feel.
Standard AS3X Mode: Tuned for the expert 3D pilot but great for flying pattern aerobatics, too.
Hover Assist Mode: Aggressive heading hold in roll, yaw and pitch so it's easier to enter and maintain a hover.

Alternate Modes
Knife-Edge Assist Mode: Heading hold settings for roll, yaw and pitch that make it easy to try knife-edge manoeuvres.
Torque Roll Assist Mode: Aggressive heading hold settings for yaw and pitch that make torque rolls easier.

Features

  • No assembly required
  • Exclusive AS3X stabilisation technology
  • Multiple flight modes that make 3D easy
  • Feather-light, carbon-reinforced foam airframe
  • Side-Force Generators for improved knife-edge flight
  • Potent 8.5mm coreless motor
  • Spektrum DSMX receiver
  • Spektrum long-throw performance linear servos
  • Stunning red and silver trim scheme
  • Carbon fibre landing gear with simulated wheel pants

Specifications:
Motor Size - 8.5mm x 23mm brushed
Servos - 2.3g (Installed)
Recommended Battery - 3.7V 1S 150mAh 45C LiPo
Approx. Flying Duration - 4-5 minutes
Wingspan - 16.9" (430mm)
Overall Length - 19.6" (497mm)
Flying Weight - 1.3oz (36g)

In the Box
E-flite Ultra-Micro UMX Yak 54 3D Electric RC Airplane (Bind-N-Fly Basic)

Required To Complete
Full-range, 6+ Channel DSMX® Transmitter
150mAh 1S 3.7V 45C LiPo Flight Battery
Compatible 1S LiPo Battery Charger

Write a review

Please login or register to review
    Brand: Eflite
  • Product Code: EFLU3550
  • Availability: In Stock This item is in stock and available to buy now!
  • £102.99

Tags: 3d, airplane, bind-n-fly basic, e-flite, eflu3550, umx, ultra-micro, yak 54