Absima Hotshot ASB1 4WD 1/10 Brushed Electric RC Sand Buggy (Ready-to-Run)

Absima presents their new 4WD 1/10 Sand Buggy with the ASB1, you finally get what you want; a high quality and robust model sport beginners Buggy in 1/10 scale. With a waterproof 40A ESC and a powerful 15-turn brushed motor brings the buggy into high gear. Together with a NiMh racing pack battery and charger all in one box, this makes it an all in one exclusive package.

Immediately striking is the extremely robust construction of the ASB1 chassis. as well as the shock towers to the front and rear, are all made of aluminium. All plastic parts are made extra strong and have the necessary flex. The reliable 4WD drivetrain is well prepared for difficult ground and the model is completely equipped with ball bearings. Both the ESC and steering servo are water resistant and the receiver sits in a sealed water proof receiver box.

Features

• Completely built ready for action
• Ball bearing transmission
• Adjustable oil shocks
• CVD steel shafts
• Powerful 550 15T motor with heat sink
• Water-resistant brushed speed controller
• Water-resistant steering servo
• Front & rear gear differentials
• Aluminium motor mount
• Sealed transmission box
• CVD steel shafts on front axle
• Adjustable turnbuckles
• Aluminium front & rear brace mount
• Printed body shell
• NiMh battery and charger included

Specifications:
Length - 430mm
Width - 280mm
Height - 165mm
Weight - 2192g
Wheelbase - 293mm
Chassis clearance - 45mm
Speed - Upto 40kmh

In the Box
Absima Hotshot ASB1 4WD 1/10 Brushed Electric RC Sand Buggy
Absima CR2S V2 AFHDS 2.4GHz 2 Channel Radio System
Absima 1800mAh NiMh Battery & Charger

Required to Complete
4AA Batteries for the Transmitter

Please Note: If you are using LiPo batteries then only use 2S (2 cells - 7.4V) LiPo batteries with a C-rate of 30C or lower. If you use a LiPo with higher C-rate, the motor could be damaged, and for NiMh batteries (max. 7.2V - 6 cells) batteries only.