Blade Fusion 360 Electric Flybarless Helicopter (BNF Basic) - BLH5250

Pre-Order Blade Fusion 360 Electric Flybarless Helicopter (BNF Basic) - BLH5250

Blade Fusion 360 Electric Flybarless Helicopter (BNF Basic)

Expanding on the Fusion line of helicopters, the Blade Fusion 360 redefines BNF performance in a 300-sized machine. With the popular 360 size, Blade has taken a fresh approach in redeveloping the Fusion 360 by adding high-end hardware, all carbon fibre and aluminium construction, improved power system package, and more.

Cutting-edge Spektrum technology is featured throughout this beast from new Spektrum 3055 & 3065 servos with Optimised Servo Geometry to the new ground-breaking Spektrum 6250 HX flybarless system. This new flybarless controller features advanced adaptive flight control algorithms, forward programming, 6-axis M.E.M.S. inertial sensor, low-latency high-speed operation, two remote receiver ports for diversity, and a vibration rejecting aluminium lower case.

Pre-installed and pre-programmed in the Fusion 360 is a Hobbywing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive headspeeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The new all carbon fibre and aluminium design takes frame rigidity to another level for a rock solid flight experience. The new carbon fibre main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminium tail case improving vibration damping and performance. All this combines to give pilots one of the best flying Blade models to date!


  • BNF Basic Convenience
  • 2221 - 1800Kv Brushless Outrunner Motor
  • Spektrum™ 6250 HX Flybarless Controller With Two Remote Receiver Ports
  • 6S Power System Provides Ballistic 3D Performance
  • Hobbywing 60A Platinum ESC With New IC3 Connector
  • Spektrum 3055 and 3065 Servos
  • Optimised Servo Geometry
  • Fiberglass Canopy and Painted Tail Fin
  • Carbon Fibre Landing Gear
  • Optimised and Lightened Main Frame
  • Forward Programming
  • CNC Main Blade Grips
  • Stunning Black Anodised Hardware
  • Large Tail Boom and New CNC Tail Case
  • High Visibility Fin and Trim Scheme
  • Improved Main Rotor Blade Design

Completion Level - Bind-N-Fly Basic
Approximate Assembly Time - No assembly required    
Approximate Flight Time - 4 minutes    
Battery - 6S 1300 - 1800mAh required    
Canopy/Body Material - Fiberglass    
Channels - Full range 6-channel DSMX transmitter required            
Main Blade Material - Carbon    
Main Motor Type - Brushless Outrunner    
Main Rotor Blade Length - 13.8" (350mm), Range: 13.8" - 14.2" (360mm)    
Main Rotor Diameter - 31.3" (796mm)
Tail Rotor Diameter - 6.9" (175mm)        
Main Rotor Head Type - Collective pitch (CCPM) flybarless    
Pinion Size - 11 tooth    
Pinion Size (Range) - 11 to 12 tooth    
Servos - Swash Servos, Spektrum 3055 MG, Tail Servo, Spektrum 3065 MG    
Skill Level - Level 3    
Swashplate Type - 120 degree CCPM    
Tail Drive - Belt Drive    
Tail Ratio - 4.59:1    
Width - 3.5" (90mm)
Length - 27" (685mm)    
Height - 7.5" (190mm)    
Flying Weight - 32.3oz (915g)

In the Box
Blade Fusion 360 Electric Flybarless Helicopter (BNF Basic)

Required to Complete
Full-range 6+ Channel Spektrum 2.4GHz DSMX Transmitter
(Not required; Optional) Gen2 or iX12 required for Telemetry and Forward Programming Features
22.2V 6S 1300-1800mAh 30C+ LiPo Flight Battery with EC3/iC3 Connector
Compatible LiPo Battery Charger

Write a review

Please login or register to review
    Brand: Blade
  • Product Code: BLH5250
  • Availability: Pre-Order This item is not in stock. You can add to cart and checkout - we will notify you once it is back in stock
  • £589.00

Tags: 360, blh5250, bnf basic, blade, electric, flybarless, fusion, helicopter