Xpert Electronic Power Switch for Nitro Models Using NiMh, LiFe and LiPo Batteries - XP-B3206
Xpert Electronic Power Switch for Nitro Models Using NiMh, LiFe and LiPo Batteries
Xpert electronic power switch as used by many top drivers to give a more reliable switch than a standard mechanical unit.
This is fully compatible with all common types of receiver battery pack. Using two LED's the switch provides feedback regarding its current status and battery voltage.
L1 Light indicates battery type selected. Solid light indicates high Voltage (LiPo/LiIon/LiFe) and flashing indicates low voltage (NiMH and Life)
L2 provides feedback about battery voltage and will flash when the voltage drops to a pre-determined level of 5.3V NiMH/6.8V LiPo and will become solid at 4.8V NiMH/6.4V LiPo indicating the battery is below useable levels.
Input Voltage - 6.0V - 7.4V
Output Voltage - DC 6V/10A - 7.4V/8A
Battery Mode - NiMH/LiPo/LiFe
Mounting Dimensions - 28.5x16mm Includes bracket with holes for transponder mounting
Dimensions (LxWxH) - 29.4x19x11.3mm
Weight - 10g
This switch will not work with electric models, designed only to work with Nitro models.
This switch does not provide a low voltage cut off, only an indicating light to inform you of the approximate battery voltage.
This switch consumes a slight amount of power when in standby mode. To avoid over discharging the battery, you must disconnect the battery plug after use.
This switch does not replace a failsafe setting on your radio and simply provides feedback on battery status.