Sky RC T200 AC/DC 12A Dual Balance Charger/Discharger for LiPo, LiFe, LiHV and NiMh Batteries - SK-100155

Click Image for Gallery

Description
Reviews (0)

Sky RC T200 AC/DC 12A Dual Balance Charger/Discharger for LiPo, LiFe, LiHV and NiMh Batteries

Sleeker Than Ever
T200 comes ready to charge in the most compact design yet while taking up minimal space in the pit area. Only taking up about as much bench space as a pair of battery packs, the charger delivers dedicated 100W integrated power per each of the two complete charging circuits. Inside the case, there’s enough transformer power to fill two batteries simultaneously at up to 12 amps each, that you can pump life into everything from a receiver pack to a 6S LiPo or 15S NiMH or NiCd. All the programmability you expect of a modern higher-level charger is built in!

Multiply the Efficiency with Duo
With each charging channel programmed and operating independently, T200 allows you to charge two batteries simultaneously, and it will intelligently and automatically charge the packs at once to their maximum capacity. To top of it, the cells being charged do not even necessarily have the same configuration or be of the same chemical type.

Multi-purpose for Most Chemistries with Generic XT60
The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCd, and Pb (lead acid). With the almost de facto standard of XT60* interface, plugging prevents reverse polarity and ensures super-solid connection.

*Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80℃ thanks to their gold-plated spring pins’ better contact surface area.

Versatile With the Addition of AGM and Cold Modes
AGM (Absorbent Glass Mat) battery is maintenance free, provides good electrical reliability and is lighter than the flooded lead acid type. However, AGM batteries are far more different than lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode.

Optimised Operating Software
SkyRC T200 features the so-called AUTO function that sets the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two-way linkage and communication, to achieve the maximum safety and minimise the trouble. All the settings can be configured by users!

Intuitive Operation
The five-button panel and the brightly backlit LCD screen making the charging a breeze even for beginners. The charging programs with the same logic as many other chargers by SkyRC, so it will be familiar to many users. But even if T200 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. After one run through the manual, you’ll have it down.

Features

2 independent charging channels
2 x 100W charging power and maximum 12.0A charging current
10 Battery memory
High-contrast LCD display
Easy operation
XT-60 connector on charging output
XH balancer connector
Various security monitoring

Specifications:
Case Material - Plastic
Case Size - 178x135x96mm
Weight - 850g
Display Type - LCD
DC Input Voltage - 11-18V
AC Input Voltage - 100-240V
Charge Wattage - 100W X 2
Discharge Wattage - 10W
Battery Type - LiPo/LiHV/LiFe/LiIon: 1-6 cells, NiMh/NiCd: 1-15 cells, Pb: 2-20V
Battery Cut-off Temperature - 20ºC / 68ºF-80ºC / 176ºF (adjustable)
Reading Voltage Range - 0.1-26.1V/cell
Charge Current - 0.1A-12.0A
Discharge Current - 0.1A-2.0A
Balance Cells - 2-6 cells
Balance Current - 500mA/cell
Safety Timer - 1-120 minutes off
Memory - 10 different charge/discharge profiles

Please Note: Batteries must be charged using a specifically designed charger for your battery. Never charge batteries unattended, when not properly used, batteries may burst into flames and catch fire. It is highly recommended that a safe pouch or fireproof container is used for storage and whilst charging the battery. By purchasing this item the buyer assumes all risks associated with its use.

Brand:

Sky RC