Overlander TS80 80W Touch Screen AC/DC LiPo/NiMh Battery Charger - OL-3027
	Overlander TS80 80W Touch Screen AC/DC LiPo/NiMh Battery Charger
	
	The Overlander TS-80 AC/DC 10A 80W Touch Screen Charger has an optimised operating system that allows you to easily set up and monitor the charging/discharging process via the touch screen. It has a high-power and high-performance circuit, with a maximum output of 80W, a maximum charge current of 10A and a maximum discharge current of 2A. This charger can be used with a wide range of batteries with different chemistries.
	
	Features
	Balance mode for Lithium battery packs: you do not require an additional balancer to balance the voltage when charging a Lithium (LiPo/LiFe/LiIon) pack.
	
	Individual cell monitoring: the charger monitors and balances each cell individually during the charging/discharging process.
	
	'Fast' and 'Storage' modes for Lithium packs: the 'Fast' mode reduces charging time, and the 'Storage' mode control the nominal voltage of the battery to make it suitable for long-term storage.
	
	Cyclic charging/discharging for NiMH/NiCd packs: allows you to perform 1-4 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
	
	Safety features: including delta-peak sensitivity, capacity limit, temperature limit (when additional temperature probe is connected - sold separately: SKU 2598), charge time limit. Input current check and an automatic cooling fan.
	
	Specifications:
	Operating Voltage Range - AC 100-240VDC 10-18V
	Charge Power - max 80W
	Discharge Power - max 10W
	Charge Current Range - 0.1-10A
	For Programmable Power Supply - 10A 80W
	Discharge Current Range - 0.1-2A
	Current Drain for Balancing LiPo - 200mAh/cell
	NiCd/NiMH Battery Cell Count - 1-15 cells
	Lithium Battery Cell Count - 1-6 cells
	PB Battery Voltage - 2-20V
	
	In the Box
	Overlander TS80 80W Touch Screen AC/DC LiPo/NiMh Battery Charger
	Leads included Deans, Red JST, Futaba, Glow Start & Crocodile Clips
	JST-XH balance system
	12v DC lead
Please Note: Batteries must be charged using a specifically designed charger for your battery.  Never charge batteries unattended, when not properly used, batteries may burst into flames and catch fire.  It is highly recommended that a safe pouch or fireproof container is used for storage and whilst charging the battery. By purchasing this item the buyer assumes all risks associated with its use.
              



















                            
                            
                            
                            
                            
                            














































                            
                            
                            
                            
                            
                            

